|
The Lynx L22 is a
professional audio interface card intended for use in the most
demanding audio recording, post-production, broadcast, and measurement
applications. Based on LynxTWO technology, the L22 can capture or
generate signals beyond the audio bandwidth up to 100 kHz with extreme
accuracy.
Using proprietary circuit topologies and custom components in the analog
stages coupled with the latest converter technology, the L22 achieves a
117 dB dynamic range. Most importantly, advanced noise-rejection design
techniques are incorporated to maintain this performance in real world
use from computer to computer.
Glitch-free recording and playback is assured due to the L22's large
on-board buffers and extremely efficient zero-wait state DMA engine.
These features provide tolerance to system latencies and significantly
reduce load on the host CPU.
The onboard digital mixer is extremely flexible allowing the L22 to
adapt to any studio or workstation configuration. Each of the mixer's
16 outputs is capable of mixing signals from 16 physical inputs or 16
playback tracks with 32-bit precision. A choice of dither algorithms is
available on each input to mask low-level artifacts while reducing word
widths to 8, 16, or 20 bits.
The L22 provides I/O expansion via its two LStream™ ports. Combined,
these ports allow 16 channels of additional I/O from external ADAT or
AES/EBU devices. The ports can also be used to route data and
synchronize to other L22's or LynxTWO's to create high channel-count
systems.
As with other Lynx products, the L22 provides unprecedented
compatibility with a wide range of platforms and operating systems.
Lynx device drivers are developed in-house to insure quality and
robustness.
Download the Lynx L22 Brochure (287KB PDF)
Lynx L22 hardware specifications.
- 200kHz sample rate / 100kHz analog bandwidth (Supported with all drivers)
- Two 24-bit balanced analog inputs and outputs
- +4dBu or -10dBV line levels selectable per channel pair
- 24-bit AES3 or S/PDIF I/O with full status and subcode support
- Sample rate conversion on digital input
- Non-audio digital I/O support for Dolby Digital® and HDCD
- 32-channel / 32-bit digital mixer with 16 sub outputs
- Multiple dither algorithms per channel
- Word, 256 Word, 13.5MHz or 27MHz clock sync
- Extremely low-jitter tunable sample clock generator
- Dedicated clock frequency diagnostic hardware
- Multiple-board audio data routing and sync
- Two LStream™ ports support 8 additional I/O channels each
- Compatible with LStream modules for ADAT and AES/EBU standards
- Zero-wait state, 16-channel, scatter-gather DMA engine
- Windows 98 / ME / NT / 2000 / XP Drivers
- Macintosh ASIO 2.0 Drivers
- Optional LStream Expansion Modules:
Included:
- XLR Male to RCA Male S/PDIF Adapter Cable
- XLR Female to RCA Male S/PDIF Adapter Cable
- Lynx L22 Installation and Users Guide
- Warranty Registration Card
- Lynx L22 Setup Disk for Windows
- Lynx L22 Audio Cable
- Lynx L22 Sync Cable
- Lynx L22 24-bit/192kHz Digital Audio Card
| 
