|
FPM-1: Single channel AC-powered, 48-volt phantom power supply. Will
operate with any microphone requiring from 12 volts to 48 volts @ up to
10 ma. Very low noise and distortion. 3-year warranty.
The FPM series power supplies will power any condenser or electret
type microphone requiring phantom power of 12 vdc to 48 vdc. Each
channel is individually regulated to guarantee the lowest possible
noise and crosstalk delivering up to 10 ma per channel. Each channel is
also completely protected from shorts and other potential problems. The
inputs and outputs are AC coupled to protect the outputs from any DC
leakage. Though each module is powered by it’s own FPS-1 wall mounted
120 vac power supply. The units are designed to be completely modular,
this modular design will allow up to twelve channels to operate from
one FPS-1 supply.
Specifications
CHANNELS ONE
FREQUENCY RESPONSE + 0/ -, 01 dB 20 Hz -20 kHz
BANDWIDTH + 0 dB, -3 dB 2 Hz -200 kHz
DISTORTION < 0.001 %
SIGNAL / NOISE > 120 Db
CROSSTALK N/A
INPUT CONNECTORS 3 PIN XLR
OUTPUT CONNECTOR 3 PIN XLR
HEIGHT 1.73" WIDTH 2.8" DEPTH 3.3"
WEIGHT 12 OZ'S .
POWERR REQUIREMENTS 24 V AC @ 30 ma .
PS-1 SUPPLY REQUIREMENTS 120 VAC@ 6 ma .
| 
